Victor-technology 1260-3 Manuel d'utilisateur télécharger pdf (Page 11)

25. [N] Item Count Key

Calculations with item count and/or averaging. Also used to set the N count to

Gross or Net.

26. [# / S] Date / Subtotal Key

# : It will print live entry as an identifier as an invoice number with “#” mark.

S : It prints but does not clear the accumulator.

27. [T] Total Key

Prints and clears the accumulator. When this key is pressed with the “GT” switch

is on, the result is accumulated automatically in the memory register.

28. [MT] Memory Total key

Prints and clears the memory.

29. [MS] Memory Subtotal key

Prints but do not clear the memory.

30. [M-] Memory Minus key

Subtracts an amount from memory. If there is a live calculation pending, the

Memory Minus key will complete the calculation and subtract the amount from

Memory.

31. [M+] Memory Plus key

Adds an amount to memory. If there is a live calculation pending, the Memory

plus key will complete the calculation and accumulate the result to Memory.

32. [

÷], [=] Square Root key

By pressing the ÷ and then the = key, the square root result will be achieved.

TROUBLESHOOTING

Many problems such as no power, no key response etc. Can be resolved using the

RESET button. Please follow these instructions:

1. Machine must be plugged in and ON, and in the PRINT mode.

2. Turn machine over so you can see the battery compartment.

3. Open the battery compartment and locate the RESET button located next to the

silver battery.

4. Depress the RESET button; you will hear the machine cycle. If you do not hear the

machine recycle, push the button a 2

time.

5. Replace the battery compartment cover and turn the machine right side up.

6. Test the machine.

If this procedure has not successfully resolved your problem please call 1-800-628-2420

for future assistance.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 33 34

Pas de commentaire

Victor-technology 1260-3 Manuel d'utilisateur Page 11